The Micro PDB has been engineered to provide the highest possible performance and reliability in a 32*22mm & 4 layers PCB. It distributes power from a battery pack to 4 ESCs, as well as providing dual synchronised & regulated DC outputs for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc. It offers a very compact solution to achieve 2A continuous output current over a wide input supply range(3S to 5S LiPo).
Specs:
Power Distribution Board: Input voltage range (3S-5S operation): 7 - 21V DCRegulated 5V and 12V outputsLED power indicators ( 5V & 12V outputs )4 ESC outputs
ESC output: Continuous current, 20A per outputPeak current (10 seconds/minute): 25A per output
BEC 5V output: Designed for RC Receivers, Flight controllers, OSD, and Servos.DC/DC synchronous buck regulator. Voltage: 5.0 +/- 0.1VDCContinuous current: 2 Amps (Max.2.5A 5s/minute) Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)Short-circuit tolerant (5 seconds/minute)
BEC 12V output: The battery should be 4S~5S LiPo (12.8~21V DC)Standard output designed to power cameras and video transmitters,etc.DC/DC synchronous buck regulator, Efficiency is up to 96%. Voltage: 12.0 +/- 0.2VDCOutput Ripple: 20mV (VIn=16V, VOut=12V@2A Load)Continuous current: 2 Amps (Max.2.5A 5s/minute)Short-circuit tolerant (5 seconds/minute)BEC 12V @ 3S LiPoOutput voltage= 3S LiPo voltage x 95%Dimensions: 32 x 22 x 3 mmWeight: 3.5g
Features:
- 2oz copper & 4-layers PCB
- ESC & Battery solder tabs in pairs
- 5V & 12V Output LED indicators & Short circuit tolerant
- Micro size & lightweight
1 is required to operate the Watcher drone.
Power distribution board
- I'm a product detail. I'm a great place to add more information about your product such as sizing, material, care and cleaning instructions. This is also a great space to write what makes this product special and how your customers can benefit from this item.